ZERO 400 IP 20 stationary mercury-vapour UV lamp
|Emission half-width:||approx. 27 nm|
|Input voltage:||230 V - 50/60 Hz|
|Lifetime of UV source:||approx. 1500 hrs|
|Operating current:||3,3 A|
|Protection class:||IP 20|
|Recovery time:||< 10 min|
|Risk class acc. to EM6:||II / III (switchable)|
|UV intensity at 400 mm:||risk class II – 3500 µW/сm², risk class III - 5500 µW/сm²|
|UV source :||1 x HTC 400|
|Warm-up time:||3-4 min|
|Weight :||31 kg|
The lamp has a steel housing incorporating all electrical components like starting controller, follow up relay, mains switch, protective devices, temperature monitoring device, ventilator, connector block and aluminum case for UV radiant (400 W). The main power supply cable is the Oilflex 540 P.
The ZERO 400 IP 20 lamp is furnished with a UVB long-pass filter, which cuts off the emission in UV-B and UV-C spectral ranges, protects the bandpass filter and limits the glass surface temperature to 80°C. The lamp can be switched between two levels of UV irradiation intensity and thereby two risk classes.